How to update using a USB Mass-storage device Стр. 1 из 3 FIRMWARE UPDATING How to update using a USB Mass-storage device 1. Copy the software corresponding to the model to USB Mass-Storage device. (root directory) Note: The software should be renamed to upgrade.pkg from the original one before copying.
Page 3
How to update using a USB Mass-storage device Стр. 2 из 3 Fig.3 Plugging USB Mass-storage device into the USB slot on the TV (Actual view) 3. Turn TV on, then a software updating wizard will be displayed. Select "YES" and press "OK"...
Page 4
How to update using a USB Mass-storage device Стр. 3 из 3 5. Unplug the USB Mass-storage device, and turn TV off. Fig. 6 Removing USB Mass-storage device 6. Turn TV on and press "MENU" and "0000" on the remote control to confirm a new software version.
Стр. 1 из 2 FUNCTION AND OPERATION The Remote Control A simple at-a-glance reference of your remote control. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.702\19A... 03.05.2015...
Page 6
Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.702\19A... 03.05.2015...
Стр. 1 из 2 FUNCTION AND OPERATION Using the Controls Although all necessary adjustments and controls for the television are normally made using the remote control, the buttons on the television may be used for some functions. Switching On Using the Remote Control Using the Controls file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.635\19A...
Page 8
Стр. 2 из 2 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.635\19A... 03.05.2015...
Стр. 1 из 3 FUNCTION AND OPERATION Tuning the Television Before switching on the television put your decoder and media recorder to Standby if they are connected. Quick Setup file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.869\19A... 03.05.2015...
Page 10
Стр. 2 из 3 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.869\19A... 03.05.2015...
Page 11
Стр. 3 из 3 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.869\19A... 03.05.2015...
Handling the LCD Module Стр. 1 из 4 SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water.
Page 13
Handling the LCD Module Стр. 2 из 4 3. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not remove the soiling, breathe on the surface and then wipe again. If the panel surface is extremely solied, use a CRT cleaner as a cleaner. Wipe off the panel surface by drop the cleaner on the cloth.
Page 14
Handling the LCD Module Стр. 3 из 4 6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use a wrist ground or anchor ground. 7. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for an extended period of time.
Page 15
Handling the LCD Module Стр. 4 из 4 10. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim). The gas generated by these materials can cause loss of polarity. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.377\19A... 03.05.2015...
Стр. 1 из 4 SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.
Page 18
Стр. 2 из 4 inflammability, voltage resistance, etc. therefore, use only replacement parts that have these same characteristics. Use only the specified parts when the mark is indicated in the circuit diagram or parts list. 7. Parts mounting and routing dressing of wirings should be the same as that used originally.
Стр. 3 из 4 Resistance values in orms ( ). V: Voltmeter or oscilloscope (r.m.s. or peak reading) Input resistance : Input capacitance : 200 pF Frequency range : 15 Hz to 1 MHz and d.c. respectively Note: Appropriate measures should be taken to obtain the correct value in case of non sinusoidal waveforms.
Стр. 4 из 4 Product Safety Notice Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are often passed unnoticed by a visual inspection and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
Стр. 1 из 2 SCHEMATIC DIAGRAM Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION" FOR DIRECT VIEW CTV ONLY, "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" OF THIS MANUAL. CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
Page 52
Стр. 2 из 2 = Electrolytic capacitor = Mylar capacitor 3. The parts indicated with " " have special characteristics, and should be replaced with identical parts only. 4. Voltages read with DIGITAL MULTI-METER from point indicated to chassis ground, using a color bar signal with all controls at normal, line voltage at nominal AC volts.
Стр. 1 из 1 PARTS LIST All Block Block : Search 1 / 25 Jump Page : Location : Search Parts No. : Block Location Parts No. Description Cabinet E100 75015709 BEZEL ASSY, 705GZ934033 Cabinet E110 75015710 BACK COVER ASSY, 705GZ934034 Cabinet E112 75015070 SCREW, (BC TO FB SCREW TYPE 1), 0Q1T1030-12-47-CR3...
Page 55
Стр. 1 из 1 PARTS LIST Electric Parts Block : Search 1 / 12 Jump Page : Location : Search Parts No. : Block Location Parts No. Description Electric Parts E200 75015197 PC BOARD ASSY, MAIN, CBPFR3HBA1 Electric Parts E250 75015077 PC BOARD ASSY, POWER, G3377-B-X-X-3-081104, PWTV8941GAAJ Electric Parts E260...
Page 56
Стр. 1 из 1 PARTS LIST Accessory Block : Search 1 / 2 Jump Page : Location : Search Parts No. : Block Location Parts No. Description Accessory E400 75014827 REMOCON HAND UNIT, CT-90326 Accessory E410 75015198 ACCESSORY KIT, (BASE SCREW, USER MANUAL, ETC), 705TZ841065 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.897\19A...
Page 57
Стр. 1 из 1 PARTS LIST Cabinet Block : Search 1 / 8 Jump Page : Location : Search Parts No. : Block Location Parts No. Description Cabinet E100 75015709 BEZEL ASSY, 705GZ934033 Cabinet E110 75015710 BACK COVER ASSY, 705GZ934034 Cabinet E112 75015070 SCREW, (BC TO FB SCREW TYPE 1), 0Q1T1030-12-47-CR3...
Page 58
Стр. 1 из 1 PARTS LIST Packing Block : Search 1 / 3 Jump Page : Location : Search Parts No. : Block Location Parts No. Description Packing E500 75015712 CARTON BOX, Z44G9032939-1A Packing E510 75015078 CUSHION KIT, Z44G9006001 Packing E520 75015076 PE BAG, (SET)(520*740), P45G9901001 file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.897\19A...
Page 59
Стр. 1 из 2 PARTS LIST Precaution WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" "PRODUCT SAFETY NOTICE". CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components which have special characteristics important for safety and should be replaced only with types identical to those in the original circuit or specified in the parts list.
Page 60
Стр. 2 из 2 : Fusible Resistor All CD and PF capacitors are ±5 %, 50 V and all resistor, ±5 %, 1/6 W unless otherwise noted. file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.018\19A... 03.05.2015...