4 Select Auto Scan and press ► or
Channels
Auto Scan
Update Scan
Single RF Scan
Channel Skip
Channel Sort
Channel Edit
OK
Scan
5 Press Cancel for no change, or press
Scan.
Previous settings will be lost ! Press
Cancel for no change, Press OK to start
OK
Update Scan
Search the new channels that are not in the programme
list.
1
Press
and then press ◄ or ► to select SETUP.
2
Press ▲ or ▼ to highlight Channels. Press ► or
to enter.
3
Select Update Scan. Press
Channels
Auto Scan
Update Scan
Single RF Scan
Channel Skip
Channel Sort
Channel Edit
OK
Enter
Note: This option is available for DVB_T only.
Single RF Scan
Scan single RF channel. You can check the Signal
Strength and the Signal Quality.
1
Select Channels from the SETUP menu.
2
Highlight Single RF Scan and press ► or
enter.
Channels
Auto Scan
Update Scan
Single RF Scan
Channel Skip
Channel Sort
Channel Edit
Enter
OK
15
Getting started
.
Select
RETURN
Back
EXIT
Exit
to start Auto
Auto scan.
Cancel
to start Update Scan.
Select
RETURN
Back
EXIT
Exit
to
Select
Back
Exit
RETURN
EXIT
3
Press ◄ or ► to select the RF Channel. Press
start scanning.
Single RF Scan
Scan single RF channel. (Digital Only)
RF Channel
Signal Strength
signal Quality
Analogue Manual Scan
The television can be tuned-in manually using Analogue
Manual Scan.
1
Press
and then press ◄ or ► to select SETUP.
Press ▲ or ▼ to highlight Channels. Press ► or
2
to enter.
3
Select Analogue Manual Scan. Press ► or
confirm.
Channels
Auto Scan
Update Scan
Analogue Manual Scan
Channel Skip
Channel Sort
Channel Edit
Analogue Channel Fine Tune
OK
Enter
4
Use number buttons 0~9 to enter the Start
Frequency. Press ▲ or ▼ to select Scan Up or Scan
Down. Press ► or
to start scanning. Press
stop scanning.
Analogue Manual Scan
Search for analogue channels
Start Frequency (MHz)
Scan Up
Scan Down
0%
8
100
Good
Scan
Back
Exit
OK
RETURN
EXIT
to
Select
RETURN
Back
EXIT
Exit
RETURN
175.25
Back
Exit
RETURN
EXIT
to
to