Table of Contents
Advertisement
Turning on the TV
Switching on the TV
Connect the power cord to a wall outlet, the
indicator lights in red (standby mode).
1
Press
on the remote control or
control panel, the
Switching off the TV
1
Press
on the remote control or
control panel to switch to the standby mode.
Notes:
• This TV is not fully disconnected from the main supply,
as minute current is consumed even when the TV is
turned off. When the TV will not be used for a long
period of time, such as during vacation or travel,
remove the power plug from the wall outlet.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If power is
going to be off for a long time and you are going to be
away from your TV, unplug the power cord to prevent
the TV from turning on in your absence.
Initial Setup
Before switching on the TV, put your decoder and media
recorder to Standby if they are connected and ensure
the antenna is connected. To setup the TV, use the
buttons on the remote control as detailed on page 12.
1 Connect the television to the main power and press
the POWER
button. The Initial Setup screen will
appear at the first use. Press
setup.
Initial Setup
Welcome to the initial setup
wizard.
Please press [OK] to start the
wizard.
2 Press ▲ or ▼ to select your language and press ►
to the next step.
Initial Setup
Please select your language:
Back
Select
13
Getting started
power
on the TV
power indicator lights in green.
on the TV
to start the initial
Welcome
Next
Language
English
Français
中文
Next
Exit
EXIT
3
Press ▲ or ▼ to select the Energy Saving Mode and
press ► to the next step.
Initial Setup
To use this TV for displaying
in a store showroom, please
select [Store].
[Home] mode is recommended
for normal use.
Back
Select
4
Press ▲ or ▼ to select the Province/State and press
► to the next step.
Initial Setup
Province/State
Back
Select
Notes:
• To ensure your television is operating at optimal
energy efficiency, select Home mode during initial
activation. Home mode is recommended for normal
home use.
• The factory default settings of this television meet
ENERGY SAVING requirements. Changing Picture
Settings may increase energy consumption, possibly
beyond the limits required for ENERGY SAVING
qualification.
• To return to Home mode settings, select Standard
picture mode.
• Standard picture mode is used to achieve published
average power values, and this mode is recommended
for normal home use.
5
To start channel scan, press ►.
Initial Setup
First, please connect
antenna/cable.
Start channel scan now ?
If you skip this step, the
channel scan can be performed
in the TV Menu.
Back
Select
The search will begin for all available stations. The slide
bar will move along the line as the search progresses.
Note: If you skip this step, the channel scan can still be
performed later in the Setup Menu.
Engrgy Saving Mode
Home
Store
Next
Exit
EXIT
Province/State
New South Wales
Victoria
Queensland
South Australia
Western Australia
Tasmania
Northern Territory
Next
Exit
EXIT
Channel Scan
Scan
Skip Scan
0%
Next
Exit
EXIT
Hide quick links:
Advertisement
Table of Contents
