Input Selection
Defining the INPUT and OUTPUT sockets so that the
television recognises connected equipment.
See page 9 and 10 for a clear view of the back
connection recommendations.
Alternatively press the external source selection button
until the picture from connected equipment is shown.
Use the Input Selection if the television does not switch
over automatically.
1
Pressing
a list will appear on screen showing all
stored external equipment. Use ▲ and ▼to highlight
and
to select.
TV
1
2
3C
4C
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
Note: The "HDMI 3" port is available for model
26AV700A, 32AV700A, 32CV700A, 40CV700A, and
40RV700A only. The "HDMI 4" port is available for model
32CV700A, 40CV700A, and 40RV700A only.
®
HDMI
displays equipment connected to Input HDMI
on the back of the television. It is designed for best
performance with 1080p high definition signals.
27
Using the TV's features (General)
Main
REGZA-LINK
REGZA-LINK Setup
This feature uses CEC (Consumer Electronics Control)
technology, and allows the control of Toshiba REGZA-
LINK compatible equipment from the television's remote
control.
Note: Not all Toshiba products currently support REGZA-
LINK.You can set the subtitle on or off whilst watching
TV.
1
Highlight the REGZA-LINK Setup in the
PREFERENCES menu, and press ► or
PREFERENCES
REGZA-LINK Setup
Teletext
Subtitle
Audio Channel
Auto Format
4:3 Stretch
Side Panel
Game Mode
Enter
OK
2
Use ▲ or ▼ to select the Enable REGZA-LINK, then
press ◄ or ► to select On or Off.
REGZA-LINK Setup
Enable REGZA-LINK
Auto Power On
Auto Standby
Amplifier Control
Speaker Preference
TV Auto Power On
The Auto Power On setting allows the television to
be automatically switched On or Off if a REGZA-LINK
device is turned On or Off.
1
Highlight the REGZA-LINK Setup in the
PREFERENCES menu, and press ► or
2
Use ▲ or ▼ to select the Auto Power On, then
press ◄ or ► to select On or Off.
to select.
Stereo
Off
Off
1
Select
Back
Exit
RETURN
EXIT
On
Off
Off
Off
TV Speakers
Select
Back
Exit
RETURN
EXIT
to select.