Pass-Through Control; Equipment Control - Toshiba 22AV700A Owner's Manual

2 The REGZA-LINK icon appears automatically after
detected with REGZA-LINK compatible equipment.
Press ▼ to highlight the input source shown with the
REGZA-LINK icon.
TV
1
2
3C
4C
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
3 Press ►. A second selection screen will appear
showing all connected REGZA-LINK equipment.
4 Press ▲ or ▼ to highlight an input source, and then
press to select.
NOTE 1: When the television is switched on, it will take
a few minutes for the REGZA-LINK icon to appear in the
list, when an HDMI cable is removed, it will take a few
minutes for the logo to disappear.
NOTE 2: If the HDMI cable from the connected
equipment is changed, or HDMI equipment settings are
changed, the Enable REGZA-LINK in the REGZA-LINK
setup menu may need to be reset to On.
NOTE 3: When the REGZA-LINK input source
is selected, some REGZA-LINK equipment may
automatically switch on.
The following features are dependent on the connected
equipment. For operating information, refer to the
operation manual for all connected equipment.
Note: The "HDMI 3" port is available for model
26AV700A, 32AV700A, 32CV700A, 40CV700A, and
40RV700A only. The "HDMI 4" port is available for model
32CV700A, 40CV700A, and 40RV700A only.
29
Using the TV's features (General)
Main
REGZA-LINK

Pass-Through Control

The Pass-Through feature allows you to control the
connected REGZA-LINK device by the television's
remote control.
1 Press ▲ or ▼ to select REGZA-LINK in the Quick
Access Menu, and then press OK. The control panel
will appear.
When there are two or more REGZA-LINK devices
connected to the television, a device selection menu
will appear. Highlight the device you want to control,
and then press to select.
GUIDE
MENU
ROOT CONTENTS
2 Press the key on the television's remote control as
guided by the control panel shown.
NOTE: The available functions are dependent on the
connected equipment, not all the remote functions
may be available. Please refer to the operation manual
of the connected equipment.

Equipment Control

The REGZA-LINK mode on the television's remote
control allows the control of connected REGZA-LINK
equipment being watched.
To control the REGZA-LINK input source, first select the
equipment with REGZA-LINK input source selection,
then switch the mode on the remote control to REGZA-
LINK and press any buttons.
The available functions are dependent on the equipment
connected. Not all the remote control keys may be
available. Please refer to the operation manual for each
piece of equipment connected.
NOTE: The television features that can be controlled
by the connected equipment are: Standby, Volume,
Channel, Sound Mute, Display Information, Number
Buttons and Previous Programme.
EXIT
RETURN
MENU
TOP DVD