3.3 PCI or PCIe Bus Expansion
The panel PC supports either one PCI or one PCIe bus expansion card. To integrate
a new expansion bus card into the system, follow these instructions:
1.
Turn off the panel PC.
2.
Unscrew the screws on the top of the rear cover, and remove them.
3.
Remove the metal plate by unscrewing the attaching screw.
4.
Insert the PCI or PCIe into the PCIe slot of the riser card. (See Figure 3.2)
5.
Run the setup program within the OS to configure the system.
Figure 3.2 PCI & PCIe Bus Expansion
13
PPC-179T User Manual