C Display; Item Setup - GReddy e-01 Instruction Manual

C DISPLAY

This feature can display 3 input signals at real time such as boost,
rpm, and Throttle position data. There are 4 different display format to
choose from, Digital, Graph, Gauge, and Bar graph. HI, LO boost
selection, SET BOOST , GAIN, START BOOST can be adjusted in
this mode.

ITEM SETUP

Display data list and description
OFF
BOOST
E/G Rev
AN CH1
AN CH2
PL CH1
PL CH12
THROTTLE
SOL.DUTY
AIR FOLW INPUT
AIR FOLW OUTPUT
NORMAL DURATION
NORMAL DUTY CYCLE
TOTAL DURATION
TOTAL DUTY CYCLE
IGN. TIMMING ADJ
(1) Select the data to display
(2) Input the minimum and
maximum of the data range to
display.
(3) Press the SET knob to go to
Display screen
No Display
Boost Pressure
Engine rpm
Analog input signal channel 1
Analog input signal channel 2
Pulse input signal channel 1
Pulse input signal channel 2
Throttle position
Boost controller solenoid valve duty cycle
e-manage airflow meter input signal
e-manage airflow meter output signal
e-manage Stock injector duration (ms)
e-manage stock injector duty cycle (%)
e-manage Stock injector duration (ms)
e-manage stock injector duty cycle (%)
e-manage adjusted ignition timing
32