B-3 PEAK HOLD
PEAK HOLD setting
This feature can store the highest data recorded and display the data
in the Display mode. The Peak Hold type can be selected.
1. PEAK HOLD
The Peak Hold type can be can be selected.
PEAK - - - - - Display the highest boost monitored.
Constant - - - Display the highest constant boost monitored.
Select PEAK or CONSTANT setting.
BOOST
SET VALUE
2. LAST BOOST
This feature will display the last highest boost monitored for 3
seconds and reset to display the next run.
Select ON or OFF setting.
BOOST
0 kPa
23
PEAK
CONSTANT
TIME
120kPa
110kPa
TIME
3SEC
3SEC