Warning Setting - GReddy e-01 Instruction Manual

B-1 CAR Select
Initial setting can be changed. See Initial Setting on page 17.
B-2 WARNING

Warning setting

Input warning point for the boost and external input signal to turn on
the LED and alarm.
Set the Limiter to turn down the boost when the pressure exceeds the
warning point.
4. LIMITER
Input a rate to decrease the boost pressure when the boost
exceeds over the warning point.
Selecting OFF will turn off the Limiter feature.
5. EXT.INPUT
Select the external input channels to turn on the warning feature.
The warning point will be set in the Ext. Input signal setup screen.
Select OFF, AND or OR.
AND - - - When both Boost and Ext. input signal reaches the
warning point, the LED and Alarm will turn on.
OR - - - When either Boost or Ext. input signal reaches the
warning point, the LED and Alarm will turn on.
1. LED
Select ON, OFF, Flash1 or
Flash2.
2. ALARM
Select ON, OFF, Alarm1 or
Alarm2.
3. BOOST
Input the boost warning point.
22