Starting The Fireplace For The First Time; The Two Modes Of Operation - Travis Industries 36 CF II Owner's Manual

8

Starting the Fireplace for the First Time

•
Burn the heater at a high setting for an extended period (up to 48 hours). This will cure the
painted surfaces. Fumes from the paint curing and oil burning off the steel will occur. This is
normal. We recommend opening a window to vent the room.
•
Condensation may appear on the glass each time you start the fireplace - this is normal.
•
Blue Flames will occur on the fireplace when it first comes on. After fifteen minutes the flames
will turn a more realistic yellow and orange color.

The Two Modes of Operation

Manual Mode
In manual mode you can turn the fireplace on and off by pressing the "Mode" button until "ON" or
"OFF" appears on the remote.
Set
Mode
Fn
Thermostat Mode
While in thermostat mode, the remote will
monitor the temperature and turn the fireplace
on and off to meet the desired temperature.
To turn on Thermostat Mode:
Press the "MODE" button on the remote until
"THERMO" appears on the LCD display.
To turn off Thermostat Mode:
Press the "MODE" button on the remote until
"THERMO" no longer appears on the LCD
display (the fireplace will be ON or OFF, see
"Manual Mode" above.
© Travis Industries
Operation
Set
Mode
Fn
Set
Mode
Fn
4100519
100-01198_001