Timer Setting - Panasonic NN-GT546W Operating Instructions Manual

IP0534_38G70KP_Eng_0630

Timer Setting

This feature allows you to program standing Time after cooking is completed and to program the oven as a minute or a second
timer or program delay start.
To use as a Kitchen Timer: Example: To count 5 minutes
1. Press.
To Set Standing Time: Example: To stand for 5 minutes after cooking (3 mins. at Medium)
1. Press 3 times.
Set the desired
cooking program.
(See page 5 for
directions.)
To Set Delay Time: Example: To start cooking 5 minutes later (3 mins. at Medium)
1. Press. 2. Press 5 times.
Set desired amount
of delay time.
(up to 99 minutes
and 99 seconds)
NOTE:
1. If oven door is opened while Standing Time, Delay Time or Kitchen Timer has been set, the time in the display window will
continue to count down.
2. Delay Time and Standing Time can not be programmed before any Auto control Function. This is to prevent the standing tem-
perature of the food from rising before defrosting or cooking begins. A change in the starting temperature could cause in
accurate results.
3. When using Standing time or Delay time, it's up to 2 Micro Power stages.
2006.6.30 10:56 Page 6
2. Set desired amount of time.
(up to 99 minutes and 99
seconds)
3 times
2. Press 3 times. 3. Press.
5 times
3. Press 3 times.
Set the desired
cooking program.
(See page 5 for
directions.)
5 times
4. Press 5 times.
Set desired amount
of starting time.
(Up to 99 minutes
and 99 seconds.)
4. Press 3 times.
- En-6 -
3. Press.
Time counts down without
operating oven.
5 times
5. Press.
Cooking starts. After
cooking, standing time
will count down without
operating oven.
3 times
5. Press.
Delayed time counts
down. The cooking will
start.