Setting The Clock And Timer; Selecting The Oven Mode - Panasonic HL-BD82S Service Manual

turn off automatically when the door is opened. The convection
fan will run during the preheat time.
5.3.10. Component Cooling Fan
Activates during any cooking or self-cleaning mode to cool
inner components and outer door surfaces. This air is
exhausted through the vent located above the oven door. It
continues to run until components have cooled sufficiently. The
cooling fan speed gets high in self-clean and whenever the
5.4.

Setting the Clock and Timer

The time of day is displayed in hours and minutes.
Always set the clock immediately after installation or after a power failure. Once power returns to the oven, the clock displays the
AM
time 12:00 .
The clock time will appear during all oven operations except when the timer or a timed cooking operation is running.
The oven is preset to a 12-hour clock and indicates AM and PM.
5.4.1. To Set the Clock
1. Touch [TIME] until the display will show the "SET
TIME" writing.
2. Touch [INC] or [DEC]
hours will begin flashing: continue until the correct hour
value and AM or PM indication is selected.
3. Touch [TIME] again to confirm the hour and minutes
will start flashing.
4. Touch [INC] or [DEC]
value or hold the key to change by 10 minute steps.
5. Touch [TIME] again or wait for 5 seconds in order to
confirm the time.
NOTE: The Time of Day can never be set if any time function is
already set: first delete all the active time functions.
5.5.

Selecting the Oven Mode

TO SET A COOKING MODE:
The following modes can be selected by moving the cooking mode knob to the desired position.
NOTE: To select Clean, also the temperature knob must be moved into the appropriate Clean position.
5.5.1. Cooking mode Sequence
1. OFF
2. CONVECTION BAKE (CONV BAKE)
3. CONVECTION BROIL (CONV BROIL)
4. CONVECTION ROAST (CONV ROAST)
5. PIZZA (PIZZA)
6. BAKE (BAKE)
7. BROIL (BROIL)
to set the desired time, the
to set the desired minutes
internal components temperature becomes high.
5.3.11. Locking the Keyboard
Hold both the keys indicated by [KEYBD. LOCK] legend for 3
seconds. Commands are now locked and [SENS LOCK] will be
displayed every time you touch any keys.
Repeat the same operation for 3 seconds to unlock the key-
board.
5.4.2. To Set the Timer
1. Touch [TIME]
writing.
2. Touch [INC] or [DEC]
value, the hours will begin flashing: continue until the
desired value is set.
3. Touch [TIME]
will start flashing.
4. Touch [INC] or [DEC]
value or hold the key to change by 10 minute steps.
5. Touch [TIME]
confirm the time.
6. [TIMER] will be steadily displayed.
7. When the time ends, reminder beeps will sound for 15
minutes or until the [TIME]
8. Timer format is usually HR:MIN, switching into MIN:SEC
during the last minute.
9. The displayed value is always rounded to the lower
minute.
8. DEHYDRATE (CONV DEHY)
9. PROOF (WARM)
10. DEFROST (CONV)
11. WARMING (WARM PLUS)
12. CLEAN
9
until the display will show the "TIMER"
to set the desired timer
again to confirm the hour and minutes
to set the desired minutes
again or wait for 5 seconds in order to
key is pressed.
HL-BD82S