Setting The Clock And Timer; To Set The Time Of Day; To Set The Timer - Panasonic HL-BD82S Operating Instructions Manual

Electric built-in oven for domestic use only
Hide thumbs Also See for HL-BD82S:
Table of Contents

Advertisement

The time of day is displayed in hours and minutes.
Always set the clock immediately after installation or after a power failure. Once power returns to the oven, the
clock displays the time 12:00
The clock time will appear during all oven operations except when there is the timer or any timed cooking
operations running.
The oven is preset to a 12-hour clock and indicates
display.

To Set the Time of Day

1. Touch
[TIME] until the display shows the "SET
TIME".
2. Touch + [INC] or - [DEC] to set the desired time,
the hours will begin flashing: continue until the
correct hour value and
selected.
3. Touch
[TIME] again to confirm the hour and
minutes will start flashing.
4. Touch + [INC] or - [DEC] to set the desired
minutes value or hold the key to change by 10
minute steps.
5. Touch
[TIME] again or wait for 5 seconds in
order to confirm the time. Then "SET TIME" will
disappear.
NOTE:
The Time of Day can never be set if any time
function is already set: first delete all the active
time functions.
10 minute steps : It will move in 1 minute steps
after 50 minutes. (Same for other time settings)

Setting the Clock and Timer

.
AM
or
indication is
AM
PM
and
. See page 26 for how to switch to 24 hour
AM
PM

To Set the Timer

This can be used as a timer when the Cooking Mode
is OFF.
1. Touch
[TIME] until the display shows the
"TIMER".
2. Touch + [INC] or - [DEC] to set the desired timer
value, the hours will begin flashing: continue until
the desired value is set.
3. Touch
[TIME] again to confirm the hour and
minutes will start flashing.
4. Touch + [INC] or - [DEC] to set the desired
minutes value or hold the key to change by 10
minute steps.
5. Touch
[TIME] again or wait for 5 seconds in
order to confirm the time.
6. "TIMER" will be steadily displayed and count
down.
7. When the time ends, reminder beeps will sound
until the
[TIME] key is pressed.
8. Timer format is usually HR:MIN, switching into
MIN: SEC during the last minute.
9. The displayed value is always rounded to the
lower minute.
ENGLISH
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents