Preparation; Clearances - Bosca SPIRIT 500 Installation And Operating Instructions Manual

OWNER´S MANUAL

PREPARATION

Factory packaging must be removed, and some minor assembly work is required prior to
installation. Access to the rear of the stove is necessary.

CLEARANCES

The Bosca Spirit 500 Pellet Stove has been tested and listed for installation in residential, mobile
home and alcove applications.
FLOOR PROTECTION: Freestanding installations, minimum 29,2" wide by 31,0" deep. The
stove must be placed on a continuous (grouted joints) noncombustible material such as ceramic
tile, cement board, brick, 3/8" millboard or equivalent, or other approved or listed material
suited for floor protection (refer to fig nº 3) .
MINIMUM
6 in. (152 mm.)
fig. Nº3
THE MATERIAL(S) USED MUST HAVE, OR COMBINE TO
HAVE, A MINIMUM INSULATIVE RATING OF ´R1´.
-7-