HP EliteBook User Manual page 157

iAMT Configuration
Select
Host Name
TCP/IP
Provision Model
Setup and Configuration
Un-Provision
SOL/IDE-R
Password Policy
Secure Firmware Update
Set PRTC
Idle Timeout
Change Intel ME Password
Select
Change ME Password
To do this
Assign a host name to the computer.
Disable/enable network interface or DHCP (assigns an IP
address if DHCP has been disabled) or change the domain
name.
Assign Enterprise or Small Business iAMT model.
Set options to control remote configuration of AMT.
Reset the AMT configuration to factory defaults.
Enable remote boot control to IDE diskette or CD-ROM and
assign a user name and password.
Set options to control requirements for the network password
and the MEBx password.
Enable or disable updating firmware remotely.
Set the real-time clock.
Set a time-out value.
To do this
Change the password.
NOTE:
Using Intel Active Management Technology (select models only) 145
The default password is admin.