Changing A Drivelock Password - HP EliteBook User Manual

Changing a DriveLock password

To change a DriveLock password in Computer Setup, follow these steps:
1. Turn on the computer, and then press
is displayed at the bottom of the screen.
2. Press f10
3. Use a pointing device or the arrow keys to select Security > DriveLock Password, and then press
enter.
4. Use a pointing device to select an internal hard drive.
– or –
Use the arrow keys to select an internal hard drive, and then press enter.
5. Use a pointing device or the arrow keys to select the password you want to change.
6. When prompted, type your current password, and then press enter.
7. When prompted, type a new password, and then press enter.
8. When prompted, type the new password again to confirm, and then press enter.
9. To save your changes and exit Computer Setup, click Save, and then follow the on-screen
instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
to enter Computer Setup.
esc while the "Press the ESC key for Startup Menu" message
Using passwords 119