Using The Wireless Controls; Using The Wireless Button; Using Wireless Assistant Software - HP EliteBook User Manual

Using the wireless controls

You can control the wireless devices in your computer using these features:
●
Wireless button
●
Wireless Assistant software (select models only)
●
HP Connection Manager software (select models only)
●
Operating system controls

Using the wireless button

The computer has a wireless button, one or more wireless devices, and 2 wireless lights. All of the
wireless devices on your computer are enabled at the factory, so the wireless lights are on (blue) when
you turn on the computer.
The wireless lights indicate the overall power state of your wireless devices, not the status of individual
devices. If the wireless lights are blue, at least one wireless device is on. If the wireless lights are amber,
all wireless devices are off.
Because the wireless devices are enabled at the factory, you can use the wireless button to turn on or
turn off the wireless devices simultaneously. Individual wireless devices can be controlled through
Wireless Assistant software or through Computer Setup.
NOTE: If the wireless devices are disabled by Computer Setup, the wireless button will not work until
you reenable your devices.

Using Wireless Assistant software

A wireless device can be turned on or off using the Wireless Assistant software. If a wireless device is
disabled by Computer Setup, it must be reenabled by Computer Setup before it can be turned on or off
using Wireless Assistant.
NOTE: Enabling or turning on a wireless device does not automatically connect the computer to a
network or a Bluetooth-enabled device.
To view the state of the wireless devices, click the Show hidden icons icon, the arrow at the left of the
notification area, and position the cursor over the wireless icon.
If the wireless icon is not displayed in the notification area, complete the following steps to change the
Wireless Assistant properties:
1. Select Start > Control Panel > Hardware and Sound > Windows Mobility Center.
2. Click the wireless icon in the Wireless Assistant tile, which is located in the bottom row of Windows®
Mobility Center.
3. Click Properties.
4. Select the check box next to HP Wireless Assistant icon in notification area.
5. Click Apply.
6. Click Close.
Wireless connections 17