Table of Contents
Advertisement
TG7511CX(e).book Page 13 Wednesday, March 24, 2010 8:41 AM
Date and time
1
1 i {#}{1}{0}{1}
2
Enter the current date, month, and
year. i M
Example: 15 July, 2010
{1}{5} {0}{7} {1}{0}
3
Enter the current hour and minute.
Example: 9:30
{0}{9} {3}{0}
L You can select 24-hour or 12-hour
clock format ("AM" or "PM") by
pressing /.
4
M i {ic}
Note:
L To correct a digit, press {<} or {>} to
move the cursor to the digit, then
make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
One touch eco mode
The {ECO/R} button on the handset
enables you to activate the eco function
with one touch.
By activating eco mode, your unit can
reduce the base unit transmission power
by up to 90% in standby mode.
You can turn on/off one touch eco mode
by just pressing {ECO/R}. The default
setting is "Normal".
– When the one touch eco mode is on:
"Low" is temporarily displayed and
i is shown on the handset display
instead of w.
– When the one touch eco mode is off:
"Normal" is temporarily displayed
and i goes off from the handset
display.
Getting Started
Note:
L When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be
reduced.
L Activating one touch eco mode
reduces the range of the base unit in
standby mode.
L If you set the repeater mode to "On"
(page 30):
– One touch eco mode is cancelled.
– "Eco Setup" is not shown in the
display menu (page 22).
Display mode
You can select to display either a single
item or multiple items on one screen at a
time for the following features:
– handset main menu icons in function
menu
– menu list, phonebook list, caller list,
and redial list
Select the desired setting:
– "Multi Items": Multiple entries/all
menu icons are shown on one screen
at a time.
– "Single Item": An entry/a menu
icon is shown on one screen in large
characters at a time.
The default setting is "Multi Items".
Using soft key (Temporarily switching
the display mode)
You can temporarily switch the display
mode by pressing A shown when
viewing the lists or selecting menu icons.
Programming the display mode
beforehand
1
1 i {#}{1}{9}{2}
13
Advertisement
Table of Contents
