First Degree Fitness Apollo AR Owner's Manual page 6

Mounting Rower Seat and Upper mainframe:
To install the rower seat, spread the
Left/Right side rails slightly and drop
the seat into the track.
Note Seat indentation must face
rearward.
Note: Clean wheels and tracks weekly with a soft dry cloth in order to decrease the rate of wear
on both wheels and track.
Nylock nuts must
be outside the
standard nut and
washer to proper-
ly secure assem-
bly
6
Rower Seat
Next, install the Main upper frame onto the Side
rail assembly as shown. You will need 8x
M8x45mm bolts, 16x M8 washers, 8x M8 standard
nuts and 8x M8 Nylock nuts.
Secure but do not tighten. You may find that the
lower bracket bolts can be difficult to access. You
can tighten these bolts completely once the rower
is standing in the vertical position so for the
moment, simply align and loosely thread lower
bolts/nuts.
Seat Indentation
Bolt Assembly Close up
M8x45mm bolt
M8 Standard nut
M8 Nylock M8 Washer
nut
M8 Washer