Upnp; Manual Installation With Axis Ip Utility - Axis 210 User Manual

AXIS 210/211 - UPnPTM
12

UPnP

TM
UPnP TM functionality is enabled by default in the AXIS 210/211. If also enabled on your
computer (Windows ME or XP), the camera will automatically be detected and a new icon
will be added to "My Network Places." Click this icon to access the camera. See page 15 for
instructions on how to set the password.
Notes:
• To install the UPnP
select Add/Remove Programs. Select Add/Remove Windows Components and open the Network-
ing Services section. Click Details and then select UPnP as the service to add.
• Once the AXIS 210/211 is accessible from your computer, it is then possible to use the One-click
installation method to provide the camera with a DNS name. See the previous page.

Manual Installation with AXIS IP Utility

Requirements:
Computer
on a LAN
AXIS IP Utility
AXIS IP Utility is a free Windows application that installs the AXIS 210 to your local network using a static IP address. AXIS
IP Utility is available on the CD supplied with this package, or from www.axis.com/techsup/software
1. Acquire an unused IP address for the AXIS
210/211. This IP address must be on the same
subnet as your computer.
2. Insert the CD into your computer's CD drive. Start
AXIS IP Utility.
3. Enter the camera's serial number and IP address.
Click Set IP.
The serial number (S/N) is on the label on
the underside of the AXIS 210/211.
4. Check that the network cable is connected. When prompted by AXIS IP Utility,
start/restart the camera, by disconnecting and reconnecting the power cable, or the
network cable if using PoE (AXIS 211 only).
service on your computer, open the Control Panel from the Start Menu and
TM
UPnP is a certification mark of the UPnP
TM
AXIS 210/211 Network Camera
Implementers Corporation.
TM
Hub/Switch