Smtp (Email); Upnp; Rtp (Multicast) Mpeg-4; Ports & Devices - Axis 207 User Manual

RTSP
The RTSP protocol allows a connecting client to start an MPEG-4 stream. Enter the RTSP
port number to use. The default setting is 554.
Network Traffic
Connection Type - The default setting is Auto-negotiate, which means that the correct
speed is automatically selected. If necessary, you can set the connection speed by selecting
it from the drop-down list.
For more information, please see the online help.

SMTP (email)

Enter the host names or addresses for your primary and secondary mail servers in the fields
provided, to enable the sending of notifications and image/video email messages from the
camera to predefined addresses via SMTP.
If your mail server requires authentication, check the box for Use authentication to log in
to this server and enter the necessary information.

UPnP™

The camera includes support for UPnP
your computer, the camera will automatically be detected and a new icon will be added to
"My Network Places."
Note:
UPnP must also be enabled on your Windows XP or ME computer. To do this, open the Control Panel from
the Start Menu and select Add/Remove Programs. Select Add/Remove Windows Components and open
the Networking Services section. Click Details and then select UPnP as the service to add.

RTP (multicast) MPEG-4

These settings are the IP address, port number, and Time-To-Live value to use for the video
stream(s) in multicast MPEG-4 format. Only certain IP addresses and port numbers should
be used for multicast streams. For more information, please see the online help.
Ports & Devices
I/O Ports - the pinout, interface support and the control and monitoring functions
provided by this connector are described in The I/O Terminal Connector, on page 34.

LED Settings

The Status indicator LED on the front of the camera can be set to flash at a configurable
interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED
behavior, see page 7, or the online help.
Note:
The LED does not flash when the stream is retrieved using MPEG-4 multicast.
, which is enabled by default. If also enabled on
™
AXIS 207 - System Options
31