Table of Contents
Advertisement
24
SMOOTH CE3.0 XT ELLIPTICAL
ASSEMBLY
STEP 14: Attach the Bottle Holder and Power Supply
NOTE: Pull down on the stride adjuster knob to allow for additional space to
make installing the bottle holder easier.
(A) Connect the water bottle holder #127 to the rear cover and secure the two
pieces together by using 4 x #126 screws.
(B) Place the rear (with the water bottle attached) and the front cover #126
around the upright tube.
(C) Secure the covers together using 4 x #128 screws
(D) Connect the power supply to the power inlet on the rear of the elliptical (See
Fig. 14B)
#122
#128
#92
92
4
4
1
Advertisement
Table of Contents
