Table of Contents
Advertisement
16
SMOOTH CE 3.0 XT ELLIPTICAL
ASSEMBLY
STEP 6:Attach the Long Connecting Bars
(A) Place the two long connecting bars on to the swinging axel plate #101
and the opposite end on the stride adjuster. Be certain that the Long
connection bar is facing the correct direction (See Fig. 6A)
(B) Secure both long connecting bars to the swinging axel plates #101by
using 2x #18 Allen head bolts, 2x #39 M8 Washer.
(C) Completely tighten the #18 bolts and insert the plastic cap
(D) Secure the long connecting bars to the stride adjuster by using 2 x #138
large bolts. (See Fig. 6B)
(E) Completely tighten the large bolts and cover with 2 x #137 protective cap
Front
Back
Fig. 6A
Fig. 6B
#18
2
#39
2
#46
2
#137
2
#138
2
Advertisement
Table of Contents
