Removing The Camera From The Housing - Ikelite Digital Housing Instruction Manual
Waterproof ttl housing, camera, and lens kit for canon eos 100d rebel sl1 and canon eos 100d rebel sl1 dslr
Hide thumbs
Also See for Digital Housing:
- Instruction manual (32 pages) ,
- Supplemental instructions (8 pages) ,
- Instruction manual (28 pages)
Table of Contents
Advertisement
Removing the Camera from the Housing
1. Thoroughly dry Housing.
2. Remove the Housing Back, Step 3, Page 9.
3. Gently remove the Hotshoe from the Camera Mount.
4. Place your index fingers over the top of the camera on opposite sides of
the flash, Diagram E. Pull the camera backward and remove from the
housing.
If you are finished using the housing, remove the Mounting Tray from
the camera bottom and slide it back into the Housing Mounting Plate,
before replacing the Housing Back.
Note: The Mounting Tray does NOT need to be removed when
changing a camera battery or memory card.
Diagram E
13
Advertisement
Table of Contents
