Entering The Water; Spare Parts; Recommended Accessories - Ikelite Digital Housing Instruction Manual

Entering the Water

As soon as you enter the water, take a moment and check to see that
the housing is properly sealed. We recommend you first water test the
housing with no camera inside to assure a safe and watertight
environment.
Next, check to see if there are any bubbles on the face of the lens port.
If there are, take your finger and remove them. If there are bubbles on
the lens port they can produce soft focus spots in your photos or video.

Spare Parts

- 0203.89 6-32 x 1/4 Captive Thumb
Screw (used to secure Port)
- 9104.5 Waterproof Bulkhead Cap
- 0184.2 Silicone Lubricant 2cc
Reclosable Tube

Recommended Accessories

Flat Port 9304.53
Designed specifically for the Canon EF-S 60mm Macro lens.
Tray + Dual Handles 9523.62
Add stability and gripping point(s) for comfortable use of the housing.
Add a second strobe to eliminate shadows and evenly light your
subjects.
External Strobes
An external strobe restores the warmer colors filtered out by water and
also illuminates the subject. The camera's flash is not accessible through
the housing, therefore, an external strobe is recommended.
(available through Ikelite or any Ikelite Dealer)
- 9569.01 Camera Mounting Tray
- 5509.19 Gear Sleeve
- 0132.36 Port Base O-ring
- 0200.1 Port cover
- 0110 Main o-ring
21