Ikelite Digital Housing Instruction Manual page 15
Waterproof ttl housing, camera, and lens kit for canon eos 100d rebel sl1 and canon eos 100d rebel sl1 dslr
Hide thumbs
Also See for Digital Housing:
- Instruction manual (32 pages) ,
- Supplemental instructions (8 pages) ,
- Supplemental instructions (8 pages)
Table of Contents
Advertisement
Attaching a Sync Cord to the Housing -
3. Line up the Sync Cord Pins with the corresponding Bulkhead
Receptacles. Gently insert Sync Cord into Bulkhead. DO NOT force this
installation. If the Sync Cord does not seat properly inside the Bulkhead,
then the Pins and Receptacles are improperly aligned (repeat Step 3).
4. Tighten the Knurled Nut snugly using your Index finger and thumb. DO
NOT use pliers or other tools to tighten the Knurled Nut.
-
Always remove the Sync Cord from your Housing when not in use and
replace the Bulkhead Cap.
Knurled Nut
Sync Cord O-ring
Sync Cord Pin
Housing
Bulkhead
Diagram F
continued
Ikelite TTL
Sync Cord
Bulkhead
Cap
15
Advertisement
Table of Contents
