Removing The Camera From The Housing - Ikelite 6950.52 Instruction Manual

Removing the Camera from the Housing

1. Thoroughly dry housing.
2. Remove the housing back, see Step 3, Opening the Housing, Page 9.
3. Remove the Hotshoe from the camera mount.
4. Place the index and middle fingers of your left hand over the top of the
camera and gently pull backward to separate from housing. Continue
pulling the camera backward and remove from housing.
If you are finished using the housing, remove the Mounting Tray from
the camera bottom and slide it back into the Housing Mounting Plate,
then replace the Housing Back. For storage and travel, remove the back
o-ring and place in a small plastic bag. Place the bag inside the housing
and re-attach the housing back.
Note: The Mounting Tray does not need to be removed when changing
a camera battery.
14
Diagram D
Optional Dome Port 5516.15