Sony BDV-T10 Operating Instructions Manual page 79

Bd/dvd home theatre system
Hide thumbs Also See for BDV-T10:
Table of Contents

Advertisement

• [Attenuate - AUDIO]
Distortion may occur when you listen to a
component connected to the AUDIO (AUDIO
IN LlR) jacks. You can prevent distortion by
reducing the input level on the unit. Distortion is
not a malfunction and will depend on the
component connected.
[On]: Attenuates the input level. The output
level is changed.
[Off]: Normal input level.
• [BD/DVD Audio Output]
The system cannot output multi-channel sound
from both the HDMI OUT jack and system's
speakers simultaneously. You can select the
output method.
[Speaker only]: Outputs multi-channel sound
from the system's speakers only.
[Speaker priority]: Outputs multi-channel sound
from the system's speakers and 2-channellinear
PCM signals from the HOMI OUT jack.
[HOMI priority]: Outputs 2-channel stereo
sound from the system's speakers, and enables
sound output from the HDMI OUT jack. Sound
format from the HOMI OUT jack depends on
the connected component.
-
• When you set
[BD/DVD
Audio Output] to [HDMI
priority], a confirmation message appears on the TV
screen. Press +-1-+ to select [OK] to complete the
setup.
• When you set
[BD/DVD
Audio Output] to [HDMI
priority], the SOUND MODE, DYNAMIC BASS,
NIGHT, "TONE," and "DEC. MODE" functions are
disabled.
• When the System Audio Control function (page 65)
is activated, this setting may change automatically.
• [Sound Effect]
You can set the system's sound effects (SOUND
MODE, DYNAMIC BASS, NIGHT, "TONE,"
and "DEC. MODE") to on/off.
[On]: Enables all of the system's sound effects.
The upper limit of sampling frequency is set to
48kHz.
[Off]: The sound effects are disabled. Select this
when you do not want to set the upper limit of
sampling frequency.
• [Speaker Settings]
To obtain the best possible surround sound, set
the speakers. For details, see "Setting the
Speakers" (page 67).
• [Auto Calibration]
You can calibrate the appropriate settings
automatically. For details, see "Calibrating the
Appropriate Settings Automatically" (page 66).
-
en
a
; j
cc
en
;j
Q.
>
Q.
_.
C
~
3
CD
;j
-
e n
79
US

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bdv-t11Bdv-e300

Table of Contents