Step 2: Connecting The System - Sony BDV-T10 Operating Instructions Manual

Blue
(Surround left speaker (L»
Gray
' - - - - (Surround right speaker (R»
Rear of the speaker
To connect speaker cords to the speaker
Green
(Center speaker)
Connector
~))::::::l~
20
U5
To connect speaker cords to the unit
When connecting to the unit, insert the connector until it clicks.
Rear panel of the unit
Red White
(Front right speaker (R» (Front left speaker (L»
The connector of the speaker cords and the color tube are color-coded depending on the type of speaker.
Connect the speaker cords to match the color of the SPEAKER jacks of the unit.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to
~,
and the speaker cord without the color tube to
8.
Do not catch the speaker cord
insulation (rubber covering) in the speaker terminals.
For connecting the system, read the information on the following pages.
Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other
connections are made.
Step 2: Connecting the System
-
• When you connect another component with a volume control, tum down the volume of the other components to a
level where sound is not distorted.