Sony BDV-T10 Operating Instructions Manual page 52

Press
1'/-"
to select the preset number
you want.
52
US
To view the station name or
frequency in the front panel
display
When the system is set to "TUNER FM" or
"TUNER AM," you can check the frequency
using the front panel display.
Press DISPLAY.
Each time you press DISPLAY on the remote,
the display changes as shown.
G) Station name*
®
Frequency**
*
This is displayed if you have entered a name for a
preset station.
**
Returns to the original display after several seconds
have elapsed.
You can preset 20 FM stations, and lOAM
stations. Before tuning, make sure to turn down
the volume to minimum.
1
Press FUNCTION repeatedly until
"TUNER FM" or "TUNER AM" appears
in the front panel display.
2
Press and hold TUNING
+/-
until the
auto scanning starts.
[Auto Tuning] appears on the TV screen.
Scanning stops when the system tunes in a
station.
"TUNED" and "ST" (for stereo program)
light up in the front panel display.
3
Press OPTIONS.
The options menu appears.
4
Press 1'/-" to select [Preset Memory],
then press
8.
5
6
Press
8.
The setting is made.
To change the preset number
Select the desired preset number by pressing
PRESET +/-, then perform the procedure from
Step 3.
1
Press FUNCTION repeatedly until
"TUNER FM" or "TUNER AM" appears
in the front panel display.
The last received station is tuned in.
2
Press PRESET +/- repeatedly to select
the preset station.
The preset number and frequency appear on
the TV screen and front panel display.
Each time you press the button, the system
tunes in one preset station.
Iir:I
• You can select the preset station number directly
by pressing the number buttons.
When you know the frequencies, you can select
radio stations by inputting the frequencies
directly.
1
Press FUNCTION repeatedly until
"TUNER FM" or "TUNER AM" appears
in the front panel display.
2
Press OPTIONS.
The options menu appears.
3
Press
1'/-"
to select [Direct Tuning],
then press
8.
4
Press the number buttons to select the
frequencies.
5
Press
8.
The setting is made.