Sony BDV-T10 Operating Instructions Manual page 21

21
us
.,.
To the video input jack of
the TV.
To the component video
input jacks of the TV.
To the HDMIIN jack
of the TV.
Rear panel of the unit
*
The HDMI cable is supplied with BDV-TlI only.
Method 3: Component video cable
(e)
and video cord
(0)
connection
If
your TV does not have an HOMI jack, but has component video input jacks, connect to the TV both
with a component video cable and video cord. Picture quality will be improved compared to using only
the video cord connection.
When connecting with the component video cable, you need to select the type of output signal (pages
29,77).
To view images from the DIGITAL MEDIA PORT adapter, you need to connect to the TV with the
video cord. Video signals from the DIGITAL MEDIA PORT adapter are not output via the
COMPONENT VIDEO OUT jack.
Method 1: Video cord
(0)
connection
This is the basic connection.
Method 2: HDMI* cable
(0)
and video cord
(0)
connection
If your TV has an HDMI jack, connect to the TV both with an HDMI cable and video cord. Picture
quality will be improved compared to using only the video cord connection.
When connecting with the HDMI cable, you need to select the type of output signal (pages 29, 77).
To view images from the DIGITAL MEDIA PORT adapter, you need to connect to the TV with the
video cord. Video signals from the DIGITAL MEDIA PORT adapter are not output via the HOMI OUT
jack.
*
HDMI (High-Definition Multimedia Interface)
This connection sends a video signal to the TV.
Depending on the jacks on your TV, select the connection method.