Sony BDV-T10 Operating Instructions Manual page 57

2
Insert the wireless transmitter.
Rear of the unit
~~­
~
~bJ
CD
• Insert the wireless transmitter with the S-AIR
logo facing up.
• Insert the wireless transmitter so that the 'Y
marks are aligned.
• Do not insert anything other than the wireless
transmitter into the EZW-TIOO slot.
3
Make sure to use the same screws to
secure the wireless transmitter.
Rear of the unit
CD
• Do not use other screws to fasten the wireless
transmitter.
To insert the wireless
transceiver into the $·AIR sub
unit
For details on installing the wireless transceiver
into the S-AIR sub unit, such as a surround
amplifier or S-AIR receiver, see the operating
instructions of the S-AIR sub unit.
iiI'I
• When you change the S-AIR configuration, Sony
recommends that you perform [Auto Calibration].
For details, see "Calibrating the Appropriate Settings
Automatically" (page 66).
For~esu"oundamp"ffer
For the S-AIR receiver
Simply by matching the ID of the unit and the
S-AIR sub unit, you can establish sound
transmission.
To set the ID of the unit
1
Press
lie>
on the unit.
The system turns on.
2
Press SYSTEM MENU.
3
Press
"'/4-
repeatedly until "S-AIR
MENU" appears in the front panel
display, then press
0
or~.
4
Press "'/4- repeatedly until "S-AIR ID"
appears in the front panel display, then
press
0
or~.
CD
• When the wireless transmitter is not inserted in
the unit, "S-AIR ID" cannot be selected.
5
Press
"'/4-
to select the desired ID.
You can select any 10 (A, B, or
C).
6
Press
0.
The setting is made.
7
Press SYSTEM MENU.
The system menu turns off.
a
Set the S-AIR sub unit to the same ID.
Sound transmission is established as
follows (example):
-
m
~
...
::::s
l»
»
c
Q.
o·
C
~
~.
57
US