Sony BDV-T10 Operating Instructions Manual page 25

25
US
II
AM
Unit
AM loop antenna (aerial)
(supplied)
FM wire antenna (aerial)
(supplied)
Outdoor FM antenna (aerial)
Rear panel of the unit
To connect the antenna (aerial)
To assemble the AM loop antenna (aerial)
IiI' ! II
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
• If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM
antenna (aerial) as shown below.
..
• Keep the AM loop antenna (aerial) and cord away from the system or other AV components, as noise may result.
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.