Step 3: Performing The Easy Setup - Sony BDV-T10 Operating Instructions Manual

=
Video
Compo""nt Video
Check that all cablltS. etc. have been connected and then stan.
Start
Set the items below reqUired to use this unit.
Each 01 these Items may be changed later under "Setup:
• Slliect tho lV connection method
• Select tho lV lype
•Select
the
BO Internet Connection
• Slliect tho Standby Mode
• Execute the Auto Calibration
. .
~
Easy Setup
..
~ Easy
Setup·
TV Connection MetnOCl
Select the video cable connecting this unit and the TV.
HOMI
29
US
Press "'/", to select the cable used to
connect the unit and TV.
Check the connection of the unit and TV
(page 21).
• When you connect the unit and TV with
an HDMI cable, select [HDMI], go to
Step 8 and set the video output resolution
to match your TV.
• When you connect the unit and TV with a
component video cord, select
[Component Video], go to Step 8 and set
the video output resolution to match your
TV.
• When you connect the unit and TV with
the video cord, select [Video] and go to
Step 9.
Press
e
or".
The setting message appears.
7
This message appears only when
performing the [Easy Setup] for the fIrst
time. It does not appear when performing
the [Easy Setup] accessed via the [Setup]
setting.
6
Press
e
or".
The Setup Display for video cable selection
appears.
5
English
Select the language to be displayed by this unit.
Espanal
Francais
---.......... + - -
HOME
Portuguls
~ Easy
Setup· 050
Turn on the TV.
Press 11(9 on the unit.
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
The Easy Setup Display for OSD language
selection appears.
If the Easy Setup Display does not
appear
Recall the Easy Setup Display. See "To
recall the Easy Setup Display" (page 32).
4
Press "'/", to select a language for the
050.
[:::::.1:=.=:=
00®
0 0 0
: 0 0 0
1=
G
=
1====
==:t::::r=
1
2
3
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the country
model.
Step 3: Performing the
Easy Setup