Sony BDV-T10 Operating Instructions Manual page 31

Bd/dvd home theatre system
Hide thumbs Also See for BDV-T10:
Table of Contents

Advertisement

12
Press
~/~
to select the setting for the
Control for HOMI function.
I-';';;~":';' E .a::.;s..:.;YS_.tu-,-p-,.co_nt..;..r~_tor_HO_MI
-;~,
You can operate this unit in conjunction with a TV connected by HOM I.
Check your TV settinos when using this function.
On
Off
Select [On] to use the [Control for HDMI]
function (page 63) when connecting Sony
components that are compatible with the
Control for HDMI function.
If you do not use the [Control for HDMI]
function, select [Off].
13
Press
e
or".
The Setup Display for [BD Internet
Connection] appears.
14
Press
~/~
to select the setting for the
BO Internet connections.
~
Eas.y Setup
~
80 Internet Connection
An Internel connection may be required for BO playback.
Allow Internet connections based on 80 contents?
Set
the
'Internet Settings" In case aUow internet connection.
Allow
00 not allow
Select [Allow] to allow Internet
connections.
If you do not allow the connections, select
[Do not allow].
15
Press
e
or".
The Setup Display for [Standby Mode]
appears.
:!
Easy Setup - Standby Mode
Shorten the startup time from the standby mode.
You can operate the player quickty after turning it on.
'Quick Start"
; Shonen the startup lime.
"Normal"
: The default setting.
Quick Start mode will increase electricity consumption
and activate the fan in the standby mQije.
QuiCk Start
Normal
16
Press
1'/~
to select the standby mode.
You can operate the player quickly after
turning on this function.
Select [Quick Start] if you want to shorten
the startup time from the standby mode. The
default setting is [Normal].
..
• Quick Start mode will increase electricity
consumption in the standby mode.
17
Press
e
or".
The Setup Display for [Auto Calibration]
appears.
18
Connect the calibration mic to the
A.CAL MIC jack on the rear panel.
Set up the calibration mic at ear level using
a tripod, etc. (not supplied). The front of
each speaker should face the calibration
rnic, and there should be no obstruction
between the speakers and the calibration
rnic.
19
Press
1'/~
to select [Start].
To cancel, select [Cancel].
31
us

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bdv-t11Bdv-e300

Table of Contents