Sony BDV-T10 Operating Instructions Manual page 35

35
US
IiI\'.I
• The system memorizes the last decoding mode selected for each function.
Whenever you select a function such as "BDIDVD" or "TUNER FM," the decoding mode that was last applied to
the function is automatically applied again. For example, if you select "BDIDVD" with "PRO LOGIC" as the
decoding mode, then change to another function, and then return to "BDIDVD," "PRO LOGIC" will be applied
again.
Effect
This decoding mode appears only when you connect
headphones to the surround amplifier.
The system outputs the sound from the headphones
regardless of sound format or number of channels. Multi-
channel surround formats are downmixed to 2 channels.
Surround effect
"HP2CH,,2)
(HEADPHONE 2
CHANNEL
STEREO)
To turn the sound effect off
Select "A.F.D. STD" for "DEC. MODE."
Sound from
-
• When you select "A.F.D. 7.ICH," depending on the disc or source, the beginning of the sound may be cut off while
the optimum mode is automatically selected. To avoid cutting the sound, select "A.F.D. STD."
• When the input signal is multi-channel source, "PRO LOGIC," "PLII MOVIE," and "PLII MUSIC" are canceled
and the multi-channel source is output directly.
• When the bilingual broadcast sound is input, "PRO LOGIC," "PLII MOVIE," and "PLII MUSIC" are not effective.
• "A.F.D. 7.ICH," "PRO LOGIC," "PLII MOVIE," "PUI MUSIC," "PUIx MOVIE," and "PLIIx MUSIC" are
canceled when you set the sound mode (page 47) to either of the following settings.
- "SPORTS"
- "OMNI-DIR"
- "MOVIE-D.C.S.-"
• Depending on the input stream, the decoding mode may not be effective.
• When changing the decoding mode while using the S-AIR receiver, sound from the S-AIR receiver may skip.