Step 4: Selecting The Source - Sony BDV-T10 Operating Instructions Manual

o
GH£:IElS
GlClE:JEl
Cl
I]J
UJ.
Disc that is played by the system
FMlAM radio (page 51)
Source
FUNCTION
--+.
"TUNERFM"/
"TUNER AM"
"TV" TV (component that is connected
to the TV (AUDIO IN LIR) jacks
or TV (DIGITAL IN OPTICAL)
jack on the rear panel (page 22»
c::l c::l
t::l
0 :
=:=.r::I:= .
(f) ,1)
G
(; 0 'l/
<0
{l)
:0
o ,.1)
0
r::I.L1U:::::::l.= i
C::::i:.===·
"SAT/CABLE" Component that is connected to
the SAT/CABLE (DIGITAL IN
COAXIAL) jack on the rear panel
(page 23)
"DMPORT" DIGITAL MEDIA PORT adapter
(page 55)
:(j-'R R
0:
'U Ll
0
1
Function
"AUDIO" Component that is connected to
the AUDIO (AUDIO IN LIR)
jacks on the rear panel (page 23)
"BDIDVD"
"BD/DVD" -+ "TUNER FM" -+ "TUNER
AM" -+ "TV" -+ "SAT/CABLE"-+
"DMPORT" -+ "AUDIO" -+ ...
Press FUNCTION repeatedly until the
desired function appears in the front panel
display.
Each time you press FUNCTION, the function
changes as follows.
You can select the playback source.
Step 4: Selecting the
Source
-
• The environment of the room in which the
system is installed may affect measurements.
DI'!I
• You can change a measurement unit (feet or
meters) by pressing the color button (RED).
22
Press
G.
Easy Setup is finished. All connections and
setup operations are complete.
To recall the Easy Setup Display
1
Press HOME.
The home menu appears on the TV screen.
2
Press
+-H
to select
Iii
[Setup].
3
Press 1'/'" to select [Easy Setup], then
press
G.
4
Press
+-H
to select [Start], then press
G·
The Easy Setup display appears.
32
US
To quit the Easy Setup
Press HOME in any Step.
-
• Loud test sound is output when [Auto
Calibration] starts. You cannot tum the volume
down. Give consideration to children and
neighbors.
• Before [Auto Calibration], install the surround
amplifier in the appropriate location. If you
install the surround amplifier in an improper
location, such as another room, proper
measurement will not be obtained.
• When you use the Wireless Surround Speaker
Kit (WAHT-SBP1, optional) for the surround
back speakers (page 17), install the speakers in
appropriate location and tum the surround
amplifier on.
21
Confirm the conclusions of [Auto
Calibration].
The conclusions appear on the TV screen.
Press +0/.. to change the page. The first page
shows the distance of speakers. The second
page shows the level of speakers. If the
conclusions are OK, unplug the calibration
mic and press 1-/oJ, to select [OK].
20
Press
G.
[Auto Calibration] starts.
The system adjusts the speaker setting
automatically.
Be quiet during the measurement.