User Configurable Options - Enable/Disable Codes; User Configurable Options - Access Codes - TurboChef TORNADO Service Manual

Rapid cook ovens
Hide thumbs Also See for TORNADO:
Table of Contents

Advertisement

USER CONFIGURABLE OPTIONS - ENABLE/DISABLE CODES

The following codes
enable
After each code, press
ENTER
any key (except 9) after entering code.
Function/Screen
Done Screen w/out "Save Time"
Done Screen w/ "Save Time" - step 1
Done Screen w/ "Save Time" - step 2
Edit Recipe Mode
Load Menu from Card
Save Menu to Card - step 1
Save Menu to Card - step 2
Snooze Screen
Time Screen (Figure 16)
Timed Mag Test
- Some codes are not available on some ovens.
- Oven must be in Off or Cooling Down mode.

USER CONFIGURABLE OPTIONS - ACCESS CODES

The following codes allow access to each function/screen listed. To enable/disable these codes (where applicable),
see above. After each code, press
Function/Screen
Edit Recipe Mode
Erase Menu*
Load Menu from Card
Master Reset
Save Menu to Card
Set PIN**
Test Mode
Unit Test
View Cook Counts
View Faults***
Zero Cook Counts*
- Oven must be in Off or Cooling Down mode.
*
To execute, press 3 after entering code.
** Set PIN after entering code. Accessing "Edit Recipe Mode" will now require new PIN instead of 9.
*** To view voltage, press ENTER. To initiate a self test, press the corresponding soft key from the voltage screen.
and
disable
each function/screen listed. They do not take you to the function/screen.
. To enable, press 9 after entering code (except
Simultaneously Press
&
BACK
ENTER
&
BACK
ENTER
&
BACK
ENTER
&
UP
DOWN
&
BACK
ENTER
&
BACK
ENTER
&
BACK
ENTER
&
BACK
ENTER
&
BACK
ENTER
&
BACK
ENTER
.
ENTER
Simultaneously Press
&
UP
DOWN
&
BACK
ENTER
&
BACK
ENTER
&
UP
DOWN
&
BACK
ENTER
&
BACK
ENTER
1 & 3
4 & 6
&
BACK
ENTER
THE CONTROL SYSTEM
-
-
-
,
-
-
-
). To disable, press
S
A
V
E
W
A
V
E
Enter Key Code
3-6-6-3 (D-O-N-E)
3-6-6-3 (D-O-N-E)
8-4-6-3 (T-I-M-E)
8-4-3-3 (T-I-D-E)
6-3-6-8 (M-E-N-U)
6-3-6-8 (M-E-N-U)
7-2-8-3 (S-A-V-E)
7-6-6-9 (S-N-O-Z)
8-4-6-3 (T-I-M-E)
9-2-8-3 (W-A-V-E)
Enter Key Code
9 (or as specified - see "Set PIN" below)
3-7-2-7 (E-R-A-S)
Bottom-left, then upper-mid soft key
9-4-7-1
Bottom-left, then lower-mid soft key
3-3-4-8 (E-D-I-T)
9-4-2-8 (W-H-A-T)
8-6-4-8 (U-N-I-T)
6-7-3-9 (O-R-E-Z)
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tornado 2

Table of Contents