TurboChef Tornado Manual
  1. Manuals
  2. Brands
  3. TurboChef Manuals
  4. Oven
  5. TORNADO
  6. Manual

TurboChef Tornado Manual

Subway
Hide thumbs Also See for Tornado:
1
2
3
4

Advertisement

Table of Contents

PREP/SERVICE AREA

Clean Oven Interior and Exterior

 TASK QUICK STEPS

Turn off the oven – press the "BACK"
key on the control panel, and wait 90
minutes
for
completely

Clean food particles from lower access
panel – remove panel, wipe out with
damp cloth, reattach panel

Clean wire rack – remove; wash, rinse,
sanitize and let dry; reinstall

Clean interior – under bottom heating
element, with damp towel; remove
stains;
wipe
thoroughly dry cooking cavity –
especially bottom of cook cavity and
wave guide covers

Clean exterior – where access panel is
connected and all other finished
surfaces
What You Will Need:
• SUBWAY
®
Oven Cleaner
• SuperSan
sanitizer
TM
• Nylon scrub pad
• Cleaning towel
Speed oven should be cleaned each morning
before it is turned on to avoid having to wait
for it to cool down
Preventive Maintenance Guide
This manual contains confidential information, It is not to be copied, or duplicated without the consent of Doctor's Associates Inc.
Tornado Oven – TurboChef
the
oven
to
cool
heating
element;
©2007 Doctor's Associates Inc. All rights reserved. December 2007

Prepare the Oven for Cleaning

1. Turn off the oven by pressing the "BACK"
key on the control pad – the control panel
will display the message "OVEN OFF
COOLING DOWN". The cooling process will
take approximately 90 minutes.
Do not attempt to clean the
CAUTION
Tornado oven during the cool
down cycle, as indicated by the
"COOLING DOWN" message
displayed on the control panel – the oven
operates at 500°F/260°C and may cause
injury if not allowed to cool completely
before cleaning
1
PREP PAGE 2.48
12/07

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tornado and is the answer not in the manual?

Questions and answers

Related Manuals for TurboChef Tornado

Summary of Contents for TurboChef Tornado

  • Page 1 Clean food particles from lower access Do not attempt to clean the panel – remove panel, wipe out with CAUTION Tornado oven during the cool damp cloth, reattach panel down cycle, as indicated by the “COOLING DOWN” message Clean wire rack – remove; wash, rinse, displayed on the control panel –...
  • Page 2 PREP/SERVICE AREA Tornado Oven – TurboChef Clean Oven Interior and Exterior continued Clean Food Particles from Lower Access Panel 1. Remove the lower access panel, below the oven door – grip the panel on both ends and pull to disengage the four clips that secure the panel to the oven 2.
  • Page 3 PREP/SERVICE AREA Tornado Oven – TurboChef Clean Oven Interior and Exterior continued 3. Using a nylon scrub pad, clean the oven interior and door, being careful not to apply pressure to the Wave Guide Caps – breaking the caps will result in a non-warranty service call 4.
  • Page 4 PREP/SERVICE AREA Tornado Oven – TurboChef Clean Oven Interior and Exterior continued Prepare the Oven for Operation 1. Lower the bottom heating element and reinstall the wire rack 2. Reinstall the lower access panel 3. Power up the oven – Press the “OVEN ON”...

Table of Contents