Last External Number Redial; When You Receive A Busy Tone - Ericsson Dialog 4186 High User Manual

u
***
d
u
Dialog 4186 High

Last External Number Redial

When you initiate an external call the system automatically stores all
the dialed digits, irrespective of whether the call was successful or
not.
Note: To redial a number that incorporates a wait for a new
dial tone, you must indicate to the telephone where in the
number it must pause and wait for the new dial tone. To do
this, press the Pause key at the proper place in the number.
See section
Lift the handset.
Press to redial the last dialed external number.
Note: Finland and Sweden, dial

When you receive a busy tone

If you call an extension and receive a busy tone or get no answer or
all external lines are busy you can use these methods:
Callback
6
If a called extension is busy or there is no answer:
Press.
Note: France, Finland and Sweden, press
Replace the handset to finish procedure.
You are called back (recall ring signal) when the ongoing call is
finished or the next time a new call is finished. You have to answer
within eight seconds, otherwise the Callback service is cancelled.
Lift the handset when you are called back.
The system calls the extension.
Note: Callbacks can be activated on several extensions at
the same time.
"Wait for dial tone" on page 17.
* * 0
Outgoing Calls
5
19