Last External Number Redial; Wait For Dial Tone - Ericsson Basic telephone User Manual

Redial
Redial
* * *
BusinessPhone - Analog Telephone

Wait for dial tone

Sometimes it is required to wait for a new dialling tone after dialling
the prefix digit when making an external call. In such situations, you
must store the pause for a new dial tone into the number:
On the Ericsson Basic and Medium telephone:
Press
Note: This function is not supported for other analog
telephones.

Last external number redial

When you initiate an external call the system automatically stores
all the dialled digits, irrespective of whether the call was successful
or not. Stored numbers can consist of maximum 32 digits.
Note: To redial a number that incorporates a wait for a
new dial tone, you must indicate to the telephone where
in the number it must pause and wait for the new dial
tone. To do this, press the required key at the proper
place in the number. See section "Make calls".
On the Ericsson Basic and Medium telephone:
Lift the handset
Press to redial the last dialled external number
On other analog telephones:
Lift the handset
Press to redial the last dialled external number
Outgoing Calls
13