Date And Time - Ericsson Dialog 4186 High User Manual

²
¯ ·
or
² ³
¯ · z
or
² ³
Dialog 4186 High

Date and Time

Your telephone has a built in clock, which is displayed when the
handset is on-hook (idle phone). The flashing colon between hour
and minute indicates that the clock is running.
Note: A mains power failure longer than 2 minutes, resets
the programmed date and time to the factory programmed
setting.
Programming date and time
In idle mode:
Press.
Select the
Press.
The display shows the current setting, for example:
CLOCK
z
Enter the month, day, hour, and minutes.
You can only change the flashing position. If you have entered a
number (0-9) the cursor goes to the next position automatically.
Notes:
You always have to enter two digits for a position. For
example, if you would like to program 1st of February 2004,
9 o'clock and five minutes, you have to enter: 02 (month),
01 (day), 09 (hour), and 05 (minutes).
If you enter a date that is not relevant (e.g. date 32), a
flashing letter indicates the mistake. You must enter a
correct value to be able to continue.
In case of a typing error:
Use the Scroll keys to move the cursor and re-enter digit.
Press to save and exit.
menu.
CLOCK
01-15 10:38
Settings
73