Number Presentation Restriction - Ericsson Dialog 4186 High User Manual

Â
 Ä
°
u
*42#
Dialog 4186 High
Handsfree
With the handset on hook.
Press without lifting the handset.
z
Dial the number.
You are connected to the caller via the loudspeaker and
microphone.
Press to terminate a handsfree call.
Wait for dial tone
Sometimes it is required to wait for a new dial tone after dialing the
prefix digit when making an external call. In such situations, you
must store the pause for a new dial tone into the number:
Press.
Note: You can program the length of a pause, see section
"Pause

Number presentation restriction

If you do not want your name and number to be displayed to the
person you are calling, you can use the following procedure.
Notes:
This function is only available in newer versions of the
exchange, and it might be blocked for use on your
extension (programmed by your system administrator).
The number presentation restriction is only valid for the
ongoing call, i.e. the procedure has to be repeated the next
time you want to use it.
Lift the handset.
Dial and wait for a new dial tone.
z
Dial the number.
Your name and number is not indicated on the called person´s
display.
length" on page 78.
Outgoing Calls
17