JVC KW-NT1 Instructions Manual page 94

Check the connection.
Remedies/Causes
Adjust the microphone unit position.
This unit can be connected with one Bluetooth cellular
phone at atime.
While connected to adevice, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
• Turn on the video component if it is not on.
• Connect the video component correctly.
• Check whether <Front AV Input> or <AV Input>
setting is correct.
(I@'
page
69)
, Check the Bluetooth setting of the device.
• Reduce the distance between the unit and the
Bluetooth cellular phone.
' % •
Move the car to place where you can get abetter signal
reception.
"No
Signal'~·'
Symptoms
BluetQothcellularphone doeS not detect
the
unit.
The rear view sere,en is notdisplayedwhenthe' • Check
<Camera Input>
setting.
(I@'
page
86)
gearlsshifted to the
revers~ (R)
position:-,i • Check the connection.
&;.~
"NoSignal"
Troubleshooting
94