JVC KW-NT1 Instructions Manual page 41

ng the information of the navigation system
•
1
. . . . '
I~
.....
~:)
Satellites
"(Green): Receiving the GPS signals and used for the
calculation.
'(Gray): Receiving the GPS signals.
'(Brown): Not receiving the GPS signals.
[}] Current speed
[I]
Direction of the car
[I]
Latitude and longitude of your current position
[I]
Altitude of your current position
W
Date/Local time
• When the System cannot receive the GPS signals, the
value of each item above are shown as "- -."
[§] Name of the unit
m
Version of the software
W
Version of the map database
[]] Version of the voice guidance database
[IQ]
Connection status of the ILLUMINATION CONTROL
lead
<On>:
The illumination signal is detected.
[TI]
Connection status of the PARKING BRAKE lead
<On>:
The parking brake is engaged.
IW
Connection status ofthe REVERSE GEAR SIGNAL
lead
<On>:
Reverse gear signal is detected.
• If the rear view screen is displayed when shifting
the gear to the reverse (R) position, the reverse
gear signal is detected
«On».
Messages:
about the status of GPS signal reception
"Check GPS
Antenna"
"Acquiring
GPS Signal"
T~
-
Current status of the GPS signal reception
41
Check the connection of the GPS
antenna.
• Acquiring GPS signals. Wait until
signal reception is completed.
• GPS signals cannot be received.
Move to the place where the System
receives the GPS signals.