Using Bluetooth@ Cellularphone - JVC KW-NT1 Instructions Manual

Using Bluetooth@ cellularphone
o
Bluetooth®
Bluetooth is ashort-range wireless radio
communication technology for the mobile device such
as mobile phones, portable PCs, and other devices. The
Bluetooth devices can be connected without cables and
communicate with each other.
• Refer to the list (included in the box) to see the
countries where you may use the Bluetooth@
function.
Bluetooth profile
This unit supports the following Bluetooth profiles;
• HFP (Hands-Free Profile) 1.5
• OPP (Object Push Profile) 1.1
• While driving, do not perform complicated
operation such as dialing the numbers, using
phone book, etc. When you perform these
operations, stop your car in asafe place.
• Some Bluetooth devices may not be connected to
this unit depending on the Bluetooth version of
the device.
• This unit may not work for some Bluetooth
devices.
• Connecting condition may vary depending on
circumstances around you.
• When the unit is turned off, the device is
disconnected.
Warning messages for Bluetooth operations
"Cannot connect. The device is registered but the
Please connect from connection has failed. Connect
your phone." from your phone, or use
<Connect> to connect the
device again
(I&
page 81).
"System can not The device cannot be
connect with this connected. Disconnect the
device. Please current device, then connect
disconnect current the device again.
device, then connect
from this device."
"Pairing Error." The operation you have tried
"Connect error."
cannot be completed. Try the
operation again. If the message
"Disconnect error."
appears again, check if the
device supports the function
"Delete error."
you have tried.
"Memory full." You have tried to copy a101st
phone book entry. Delete
unwanted names before
copying.
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit the follOWing JVC web site:
<http://www.jvc.co.jp/english/car/> (English
website only)
78