JVC KW-NT1 Instructions Manual page 75

• Sound signals emitted through the rear terminals
Through the analog terminals (Speaker out/LINE OUT)
2-channel
si~lnal
is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.
• DTS sound cannot be reproduced.
Through the DIGITAL OUT terminal
Digital signalls (Linear PCM, Dolby Digital, and MPEG Audio) are emitted.
• To reproduce the multi-channel sounds such as Dolby Digital and MPEG Audio, connect an amplifier or adecoder
compatible with these multi-channel sources to this terminal.
• DTS sound cannot be emitted.
44.1 kHz, 16 bits Linear PCM
48 kHz, 16 bits stereo Linear PCM*
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits
stereo Linear PCM
32/44.1/48 kHz, 16 bits Linear PCM
44.1 kHz, 16 bits stereo Linear PCM 1
48 kHz, 16 bits stereo Linear PCM
Dolby Digital bitstream
MPEG bitstream 48 kHz, 16 bits stereo Linear PCM
*
Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal ifthe discs
are not copy-protected.
•
PresE~t
equalizing values
CZ::::::::~uency
Sound mode
Flat,?
Hard Rock
R&~:,~
Pop
Jazz .
Dance
Count'
Reggae
Oassic;.
User1/2/3
60Hz 150Hz 400Hz 1 kHz 2.5
kHz
6.3
kHz 15 kHz
75