Listen eng
to
the satellite radio
Before operating, connect either one of the following (separately purchased) to the satellite unit connector on the
rear of this unit.
• JVC SIRIUS; Satellite Radio System,
SC-Cl and KS-SRA100, PnP, SC-VDOCl and KS-SRA100, for listening to the
SIRIUS Satellite Radio.
• XM
Satellite Radio System,
JVC Smart Digital Adapter-XMDJVC100, CNP2000UC and CNPJVCl for listening to
the XM Satellite Radio.
•
For SIRIUS Radio
Activate your subscription after connection:
e
Seled: "SAT" as the source.
--o"Bo
The SIRIUS Satellite radio starts updating all
the SIRIUS channels.
(1&
"GCI update" column
below.)
• Once completed, SIRIUS Satellite radio tunes in
to the preset channel, CH184.
8
Check: your SIRIUS ID.
Press
[Mode]
to show SIRIUS 10.
(1&
page 64)
8
Contact SIRIUS on the internet at
<httJt:llactivate.siriusradio.com/> to
activclte your subscription, or you can
call SIRIUS toll-free at 1-888-S39-SIRIUS
(7474).
"Subscription Updated. Press Any Key to
Continue." appears on the monitor once
subscription has been completed.
•
For XM Radio
Activate your subscription after connection:
• Only Channel 0, 1, and 247 are available before
activation.
e
Select "SAT" as the source.
--o-+Bo
XM Tuner* starts updating all the XM channels.
"Channell" is tuned in automatically.
(1&
"GCI
update" column below.)
8
Check your XM Satellite Radio ID
labelled on the casing of the XM Tuner,
or tune in to "Channel 0"
(~
page 64).
8
Contact XM Satellite radio on
the internet at <http://xmradio.
com/activation/> to activate your
subscription, or you can call1-800-XM-
RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4or higher).
*
XM Tuner: XMDireet
™
Tuner Box or XMDireet2 Tuner
System
GCI (Global Control Information) update:
• If channels are updated after subscription, updating starts automatically, and no sound can be heard.
For SIRIUS:
"Channels Updating XXO/O Completed." appears.
For
XM : "UPDATING" appears.
• Updating takes afew minutes to complete.
63