FINAL GEAR OIL
Change the gear oil as follows:
1. Place the motorcycle on the side
stand.
2. Remove the oil filler cap 1.
3. Drain the oil by removing the drain
plug 2 into a suitable container from
the bottom of the final gear case.
4. Reinstall the drain plug and tighten it
securely after all the oil has been
drained out. Hold the motorcycle
vertically and pour fresh oil through
the filler hole until the oil level
reaches the oil filler hole. Approxi-
mately 200 – 220 ml (6.8 – 7.4 US
oz) of oil will be required.
5. Reinstall the oil filler cap.
7-38