RIDING TIPS
STARTING THE ENGINE
Before attempting to start the engine,
make sure:
•
The transmission is in neutral.
•
The engine stop switch is in the ""
position.
NOTE: This motorcycle has inter-lock
switches for the ignition circuit and the
starter circuit. The engine can only be
started if:
•
The transmission is in neutral and
the clutch is disengaged, or
•
The transmission is in gear, the side
stand is fully up, and the clutch is
disengaged.
When the Engine is Cold:
1. Close the throttle completely.
2. Squeeze the clutch lever and push
the electric starter button.
3. After the engine starts, let the
engine run until the engine suffi-
ciently warms up.
When the Engine is Warm:
Close the throttle completely and push
the electric starter button.
5-2